|
|
本帖最后由 heavypanzer 于 2013-6-2 13:06 编辑
总结各种网上的帖子，挑了两个比较系统的
http://forum.snipershide.com/sni ... nquish-similar.html
05-02-2013, 04:27 PM #11
uskgxh11
Nemesis Vanquih would be a HUGE mistake!!!!!!
And if anyone would like to know about my comment on the vanquish... here goes...
--quantity of 3 mags at $75 ea. Won't feed period
--bullet in .308 would not chamber, stuck out of the barrel 3/4" with barrel removed. Bolt stuck back 3/4" because the bullet wouldn't go forward.
--sent to Dave at Nemesis and he not only put savage parts on my bolt he sanded down the receiver (where it screws on-and it's 50 thousandths out from one side to the other) after cutting the barrel to short. Thanks Dave, now my gun won't be able to accept any other barrels you sell, but you would know that if you could reply to some of my e-mails.
--obviously not a machinists because there are so many "chatter" marks in my barrel that every time I put a piece of lapua brass in it and shoot, since it finally will shoot, it carves the brass up so bad with cut marks that I have to fight the bolt to get the damn thing to eject.
--it shoots about 1.5 MOA and that is impressive considering the shape it is in. My desert tactical SRS shoots a consistent .217 with the 175 bergers/44gr varget/210gm/lap brass/col 2.892
--BTW, SSGTactical in Virginia wouldn't give me a refund either. They also gave me the cold shoulder. I guess they thought that was ok since I don't live close enough to actually talk to them face to face. Doug tells me that every Nemesis they got was shit, and Dave at Nemesis said it was because Doug swapped barrels on the guns he sent him? Aren't they supposed to be able to do that not that I think He did?
http://www.arizonashooting.com/v ... 3&t=162356&start=15
quietm4 Post subject: Re: Nemesis VanquishNew postPosted: 15 Sep 2012, 12:26
A friend of mine had one...overpriced POS in my opinion. The caliber was supposed to be 308 Win. The barrel was engraved 308 Win, the box was labeled 308 Win. Not a single 308 Win would fit in it; could not get the bolt to close. After 3 months of trying to get the mfg to do something about it, he came to find out that it was actually chambered in 308 Norma. Mfg wouldn't do anything to make it right...no barrel swap, no refund, nothing. Luckily, he found someone to buy the thing off him without loosing too much money.
总体来说就是：
没法上膛，没法eject，没有客服，打不出SubMOA组
That‘s more than good oh yeah~~~~~
 |
|
[复制链接]
楼主