改造FNS枪套使之适应FNS Long

firexl

购入Bladetech Revolution for FNS枪套，根据描述底部应该是开通的，因此我猜测它应该可以用在5寸管上，只不过枪管会露出来1寸。
结果到手来一看，确实是开通，但是开通的不到位：

注意上图红圈里面的内容跟本次改造无关，只是为了说明枪套的接缝有多薄（几分之一毫米的样子）。我真担心会因为疲劳而裂开。

上网搜了半天也没搜到合适的枪套，于是下决心进行改造，其实就是把洞掏大。

soil

赞动手能力

Hohenstaufenz

I have an FNS-40. Not a big fan of its grip design, as the contour of the grip feels so rigid in hand. Plus the grip is simply too damn big for CCW. I wish FNS could come up with a smaller version of FNS with a shorter grip, 13 rounds capacity will be perfect. Same goes with the new HK VP9, a compact version will be an absolute killer on the current market.

firexl

Hohenstaufenz 发表于 2014-7-14 09:31
I have an FNS-40. Not a big fan of its grip design, as the contour of the grip feels so rigid in han ...

强烈支持，我也觉得17发太长了，15发我都能接受
不过反正这个5寸的买来也不是为了ccw

Hohenstaufenz

firexl 发表于 2014-7-14 09:33
强烈支持，我也觉得17发太长了，15发我都能接受
不过反正这个5寸的买来也不是为了ccw ...

Yep yep, but the positive aspect of using an FNS on the range is that I constantly find myself confused: when does this gun ever run out of ammo? Man, it just keeps firing...and firing...........and firing....