|
|
First, sorry that I cannot type Chinese right now.
For budget reloading. Please read the top thread: http://qiangyou.org/bbs/forum.ph ... &extra=page%3D1
1. Lee Pro 1000 is a progressive, but not recommended for beginners unless you like to tweak mechanical stuff. Read Amazon review. Some people found it necessary to run one bullets several passes to achieve good results
2. Hornady is just $160 more. Save the headache and stay away from Lee progressive presses.
3. For sorting out brass cases and let them fall into the tube for auto case feed. Should only work with lee presses.
4. Should be the same thing. You don't want to reuse the powder, not worth the efforts of figuring out the weight of each charge and run them through the powder measure... 9mm uses very little power, maybe $0.01 worth of powder per round. You can use the impact puller to pull out and reuse the bullets though. Bullet cost is about $0.08 each. But the plastic impact puller might be damaged long before you pull all these rounds.
5. You can use this and a hammer to load rounds. I have never tried this. Should be very tedious.
6. A die set is needed to reload a specific round. e.g. 9mm
7. This is 2 steps more advanced than the item listed in "5". You will need the item in "6" to begin reloading.
8. You can save the money because you don't really need to clean the case. If you ever want to clean the case, a wet tumbler like Frankford Arsenal Rotary Tumbler and a media separator is recommended. |
|
发表于 2015-5-21 21:15
收藏
提升卡
变色卡
千斤顶
楼主
