【IDPA】G34, M&P9L PRO, XDM 5.25, 你会选哪个？回复一下理由？

Wreak_Havok

哪个用得顺手选哪个
如果不想打酱油的话，比扳机更重要的是要换aftermarket barrel.  推荐APEX和BarSto

Wreak_Havok

CiTY_HuNTeR 发表于 2016-3-30 13:35
不过你的G34扳机已经不是它自己了，没啥可比性。刚开始还是想尽量留在SSP，不然我就直接去看Performance  ...

这些塑料枪打SSP需要换的部件 (按重要程度排序)：

1.  Match grade barrel
2.  Trigger internals/springs
3.  Sights
4.  G34的话还可以用extended mag release, 其它两个就不行，因为只有glock出OEM的extended mag relesae, 其他的都是aftermarket，SSP illegal
5.  Grip
6.  Magazine basepads

Wreak_Havok

如果目前自己还没有任何3把中的一个，建议试试CZ custom shadow或者automatic accuracy shadow
如果一定要塑料枪，又特别喜欢最轻的扳机，建议试试XDM  

Wreak_Havok

CiTY_HuNTeR 发表于 2016-3-31 05:41
SSP可以弹匣plate加重？我怎么记得说不能超过原厂

不超过原厂塑料1盎司即可。90%的SSP legal aftermarket basepads are less than that.  Check out Springer Precision ones.

Wreak_Havok

CiTY_HuNTeR 发表于 2016-3-31 05:38
这俩都是SSP吗？

These are SSP legal ones:

http://czcustom.com/new-firearms ... ustom-2014-blk.html
http://automaticaccuracy.net/?wp ... -automatic-accuracy (not the target, but just the shadow version)

Many other models are not.  Basically if you mill slide to install adjustable sight, it's not SSP legal.  If you add accu bushing, it's not SSP legal.

Wreak_Havok

Holyfan 发表于 2016-3-31 15:22
aftermarket barrel 可以IDPA？

Yes, aftermarket barrels are legal in SSP, as long as same caliber/barrel length as factory, e.g. you cannot use 9mm conversion barrel in 40 caliber gun.

Wreak_Havok

Holyfan 发表于 2016-3-31 18:59
Barrel 对精度影响大吗？30yard之内

Too many variables... depending on your loads, your factory barrel, and most importantly your acceptable accuracy.  For me, 3 inch or less 5-shot group at @ 25 yards with my loads is acceptable for IDPA/USPSA.  YMMV