丐帮的glock mag 9mm ar终于出现了

PekingDeagle

昨天把glock mag放在9mm ar类里，今天就出了一系列

PSA 9mm ar glock compatible

vacuumgauge

PSA这是一统浆糊的节奏啊！

GARYPATAPON

出magblock就好了，不想换lower.

PekingDeagle

GARYPATAPON 发表于 2015-12-24 21:21
出magblock就好了，不想换lower.

不可能的。glock的mag release位置和弹匣角度是妨碍drop in mag adapter的决定因素。

GARYPATAPON

PekingDeagle 发表于 2015-12-25 13:11
不可能的。glock的mag release位置和弹匣角度是妨碍drop in mag adapter的决定因素。

...

是有人自制glock的mag release的

PekingDeagle

GARYPATAPON 发表于 2015-12-25 14:26
是有人自制glock的mag release的

Not drop in. Minimally it will need a hole in the mag well for the release.

GARYPATAPON

PekingDeagle 发表于 2015-12-25 16:20
Not drop in. Minimally it will need a hole in the mag well for the release.

基本上只有HAHN的那个才算真drop in. 那玩意200刀

PekingDeagle

GARYPATAPON 发表于 2015-12-27 02:06
基本上只有HAHN的那个才算真drop in. 那玩意200刀

Most colt mag blocks are drop in. Meaning you don't need to permanently modify the lower. Some disassembly required for top loaders.

GARYPATAPON

PekingDeagle 发表于 2015-12-27 08:50
Most colt mag blocks are drop in. Meaning you don't need to permanently modify the lower. Some dis ...

基本上拆了bolt catch就不会想要换回来了， 还不如弄dedicated 9mm lower

idee

PekingDeagle 发表于 2015-12-27 08:50
Most colt mag blocks are drop in. Meaning you don't need to permanently modify the lower. Some dis ...

从下面insert的太贵了。应该$30块钱的东西卖$150+。PSA的便宜，但要从上面装，要拆bolt catch，很麻烦

PekingDeagle

idee 发表于 2015-12-27 10:36
从下面insert的太贵了。应该$30块钱的东西卖$150+。PSA的便宜，但要从上面装，要拆bolt catch，很麻烦
...

下面装的没惹人做是有原因的。bottom loader容易掉下来，因为ejecter在mag block上，堂里如果有live round就可能被bolt带走而不是被eject出来。下次bolt close的时候可能走火。
上面装的如果松动会有ftf。colt的9mm ar 原型是用的top loading mag ，但是是roll pin 固定在mag well里的。

idee

PekingDeagle 发表于 2015-12-27 11:48
下面装的没惹人做是有原因的。bottom loader容易掉下来，因为ejecter在mag block上，堂里如果有live roun ...

所以都很麻烦。我刚卖掉我的AR9。9mm在100码就不太准了，意思不是很大。不过如果有塑料9mm 80%可以自己mill一个