|
本帖最后由 Wreak_Havok 于 2015-1-30 09:50 编辑
We are happy to announce that the membership clearly told us that they wanted a Compact Carry Pistol (CCP) division. The full details of that division will be coming out shortly but competitors and MD’s can start making plans now. The division is based on ESP but the guns must fit an IDPA box with a ¼ inch plywood spacer inserted in the bottom of the box to reduce the box size. Barrel length may be no more than 4.1 inches and the magazine limit will be 8 plus 1 to help level the playing field. This division will use the 125 power factor as well. We are working with Rangelog to adjust the database so that it will accept CCP classifications earlier than the March 1st rulebook effective date to allow our members to get classified for matches this year.
如果不限制扳机重量的话,这就是个“短管ESP”组。
准备给我的MP9 Compact上APEX 2.5磅的competition kit,从此不再carry此枪
New rule book published:
8.2.4 Compact Carry Pistol Division (CCP)
8.2.4.1 Handguns permitted for use in CCP must:
8.2.4.1.1 Be semi-automatic.
8.2.4.1.2 Use 9 mm (9x19) or larger cartridges.
8.2.4.1.3 Barrel length of 4.10” (104.1 mm) or less.
8.2.4.1.4 The unloaded firearm with the heaviest magazine must weigh 37.00 oz. (1048.9 grams) or less.
8.2.4.1.5 The firearm with the largest magazine inserted must fit in the IDPA gun test box measuring 8 ¾” x 6” x 1 3/8” ( 222.3 mm x 152.4 mm x 34.9 mm.)
8.2.4.1.6 Start Condition:
8.2.4.1.6.1 Single action only firearms will start cocked and locked. (hammer cocked, safety engaged).
8.2.4.1.6.2 Selective DA/SA firearms will start cocked and locked or de-cocked. This is at the shooter’s discretion.
8.2.4.1.6.3 Double action, double action only, or striker fired firearms with a de-cocking lever or button will be de-cocked using the lever or button.
8.2.4.1.6.4 Double action, double action only, or striker-fired firearms may have a manual safety engaged at the shooter’s discretion.
8.2.4.2 CCP Permitted Features and Modifications (Inclusive list):
CCP firearms must comply with all Enhanced Service Pistol (ESP) features and modifications, and equipment restrictions, with the exception that there is no dust cover length limitations. Rule 8.2.2.3.1 does not apply.
|
|