用GLOCK的你们，用的啥trigger connector？

derekcheek · 发表于 2014-9-23 09:41

本帖最后由 derekcheek 于 2014-9-23 09:47 编辑

下月初就要DROS第一把GLOCK了，17 gen 4，这把枪定位是用来靶场戳纸用的，前后瞄已经订了 DAWSON ，现在关心是否有必要做trigger job，版上玩GLOCK的各位，你们都用的啥trigger connector? stock? 原厂3.5 lb connector? Ghost 3.5? Ghost Rocket 3.5? Ghost EVO Elite 3.5? Lone Wolf 3.5?

derekcheek · 发表于 2014-9-23 11:15

Qoo 发表于 2014-9-23 09:49
这把枪会 Carry 吗？会的话不建议改太轻，不会的话越轻越好

我现在打比赛的 Glock 34 是 TTI Grand Mas ...

CARRY肯定不会，主要就是靶场打打，不过短期内也没打算玩uspsa 之类的竞技射击。

对了，这个TTI KIT除了轻之外还有什么优势？reset 短？ break脆？我搜了搜这个 kit 的评价，毁誉都有
“I got one a few days ago and sent it back. Made my pull feel like it was never going to release. The polish job on the connector was terrible. Maybe it was his coating or his treatment but a good polish job on a regular connector is better. My pull went from 2 3/4 to 4 lbs. I dried fired it a few times, didn't like the way it felt and sent it back, still waiting on refund. I have 4 of his base pads and they are great, but I had to pass on his connector. Maybe I got a bad one because there are some gm's running his products and they like them so I don't know whats up. I guess you could try one and send it back if you don't like it. ”

derekcheek · 发表于 2014-9-23 11:20

xchen57 发表于 2014-9-23 10:48
我是用的glockworx的3.5# connector 当时想要不要换整套的drop in trigger set,看到有人说把这笔钱花在子弹 ...

我也看到别的论坛有说到这个问题，glock 的设计是half cocked，需要扣扳机去扳动后面那段，改轻了fire pin spring导致部分底火比较硬的弹药打不响

derekcheek · 发表于 2014-9-23 11:27

Qoo 发表于 2014-9-23 11:23
我自己用过 Zev Tech 在我的 Glock 19 Gen 4 上，个人比较不太喜欢，因为reset不够smooth, 感觉好像有点卡 ...

嗯，OEM 3.5 ,我也是这么想，改到赛级的力度估计不太安全，毕竟好多时候去靶场还带着新手去玩

derekcheek · 发表于 2014-9-23 14:51

Qoo 发表于 2014-9-23 11:46
那最好还是换 OEM Minus " - " 的吧

ok就这么定了，谢谢

		自动登录	找回密码
密码			立即注册

[枪械知识] 用GLOCK的你们，用的啥trigger connector？