弱问MAK-90 更换家具及922r

highhope

local有人出 MAK-90 sporter，俺小白有几个问题请教大腿，先谢了啊！1. MAk-90 reciver是不是都是 milled? 如果不全是的话，怎么区分是不是 milled?
2. 怎么知道MAK-90有多少美国件呢，比较喜欢俄国纯木家具三件组。。如果换的话，得把什么件换为美国件以满足922r？我知道扳机可以换。。

另外全新$700，价格咋样啊？

非常感谢！

Philippshen

Mak90 receiver种类可多了啊， 有正常的直角切，还有angle cut，milled， stamped，区分这是看图就能分辨，楼主不如上图让大家给你参谋参谋

m429529

一般来说milled receiver长的都是这样的

那个切出来的槽应该是milled机匣最直观的特征

找到的对比图

原装的mak90上面应该是一个美国件都没有的---因为是norinco出的 不是吗
另外关于922r零件的数量，I shall quote the law:
27 CFR 478.39 - ASSEMBLY OF NON-SPORTING SHOTGUNS AND SEMIAUTOMATIC RIFLES FROM IMPORTED PARTS

(a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes.

(b) The provisions of this section shall not apply to:

(1) The assembly of such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or

(2) The assembly of such rifle or shotgun for the purposes of testing or experimentation authorized by the Director under the provisions of Sec. 178.151; or

(3) The repair of any rifle or shotgun which had been imported into or assembled in the United States prior to November 30, 1990, or the replacement of any part of such firearm.

(c) For purposes of this section, the term imported parts are:

(1) Frames, receivers, receiver castings, forgings or stampings

(2) Barrels

(3) Barrel extensions

(4) Mounting blocks (trunions)

(5) Muzzle attachments

(6) Bolts

(7) Bolt carriers

(8) Operating rods

(9) Gas pistons

(10) Trigger housings

(11) Triggers

(12) Hammers

(13) Sears

(14) Disconnectors

(15) Butt stocks

(16) Pistol grips

(17) Forearms, hand guards

(18) Magazine bodies

(19) Followers

(20) Floor plates

CiTY_HuNTeR

m429529 发表于 2016-3-30 14:32
一般来说milled receiver长的都是这样的
那个切出来的槽应该是milled机匣最直观的特征

最坑爹的就是mag一下占3个，不过可以换猫扑的

highhope

m429529 发表于 2016-3-30 11:32
一般来说milled receiver长的都是这样的
那个切出来的槽应该是milled机匣最直观的特征

谢楼上几位老大。local这个是 stamps receiver。  另外，922r看的有点晕。。就是说不改装没问题，一旦开始改装加手枪握把后托，就必须要满足美国件多余等于6个（为满足外国件少于等于10，因为AK上最多16个parts）。。这样理解对吗？

highhope

另外求推荐，美国产实木家具，ak三件套啊！

wlzb4

highhope 发表于 2016-3-30 13:13
另外求推荐，美国产实木家具，ak三件套啊！

http://www.ironwooddesigns.com/IWDNEWMAK_2.html

各种木头，各种receiver

highhope

wlzb4 发表于 2016-3-30 13:31
http://www.ironwooddesigns.com/IWDNEWMAK_2.html

各种木头，各种receiver

谢了！ 有点贵啊。。看您有两把 mak90，都换了家具了？