Braced or Unbraced and/Or back to Extension Tube

X-PGH

ATF 对 AR/AK 手枪实行赦免期 - ???


News:

https://www.youtube.com/watch?v=nt2aZ1HTaRE

ATF  Doc.

https://omb.report/icr/202208-1140-007/doc/124454800.pdf

阿鲁卡多

看似减免200刀的税，找work shop做NFA engraving至少还要100刀以上的费用

StarFox000

阿鲁卡多 发表于 2022-9-2 09:22
看似减免200刀的税，找work shop做NFA engraving至少还要100刀以上的费用

买一套iron stamping die kit和锤子最后大力出奇迹

HOW CAN A WEAPON BE MARKED?
Thankfully, the government doesn’t expect you to run out and buy expensive commercial-grade machinery just to mark your NFA items. That’s why they give you a few choices. The exact method of marking is up to you, so long as it is one of the following three:

ENGRAVED
The popularity of laser engravers in recent years has made this method the go-to for most people. Some people own their own personal laser engraver, but if you don’t, a lot of gun shops have them and can do this for you for a nominal fee. The information can also be hand engraved with a Dremel, so long as the size and depth requirements are met. It doesn’t have to be pretty; it just has to meet the requirements!

CAST
If you’re truly making the item from scratch and you have the ability and wherewithal to do so, you can cast the required information directly into the NFA item. Most people won’t be delving this deep into the manufacturing side of things, but it’s nice to know that it is an option that’s out there should you choose to go that route.

STAMPING
You can get a set of letter and number hand stamping dies at most craft stores, and this is also an acceptable way of marking the NFA item. This option is an affordable way to have the tools necessary for marking future items at your disposal. As was mentioned with the engraving option, it doesn’t have to be pretty. The ATF only cares that the required information is there in the correct size and depth.
https://www.silencercentral.com/ ... need-to-know-about/

CiTY_HuNTeR

阿鲁卡多 发表于 2022-9-2 13:22
看似减免200刀的税，找work shop做NFA engraving至少还要100刀以上的费用

其他SBR也得engraving，其实这种算是最好的方案了吧，可以一口气把之前所有想SBR的都搞了，减税就多了，以后也可以随便扔VFG上去

mm9x19

想问一下怎样做可以避免SBR
1. 去掉brace用tube和sling稳定
2. 不装VFG
3. red dot和iron sights只能留一个？



新出的积分表看着头大

winterwang

我没有pistol brace.但是有kak pistol blade。是不是也会包括在广泛的brace范畴里了？

mm9x19

winterwang 发表于 2022-9-3 21:28
我没有pistol brace.但是有kak pistol blade。是不是也会包括在广泛的brace范畴里了？ ...

对 kak blade算是brace

StarFox000

winterwang 发表于 2022-9-3 21:28
我没有pistol brace.但是有kak pistol blade。是不是也会包括在广泛的brace范畴里了？ ...

常见pistol braces

winterwang

谢谢解答。我的想法是不想去注册。是不是把它拆了不用它就没事了？

StarFox000

winterwang 发表于 2022-9-4 21:31
谢谢解答。我的想法是不想去注册。是不是把它拆了不用它就没事了？

买buffer tube foam cover或者类似Phase 5 pistol buffer tube https://phase5wsi.com/ar-15-pistol-buffer-tube.html
要不然买非AR系列比如Scropion或Vector或AK系列

winterwang

其实AR Pistol也没比AR轻便的太多。搞了个8.5寸的。想做家防的。还不如在做个肩膀垫子，戴肩膀上，不和枪连上。这样总可以吧？哦！据说这样还是有可能有麻烦？总之作弊政府和毒菜政府没两样，喜欢拿守法良民的脑袋在地上蹭，真正的罪犯在旁边看着乐。。。

xiaojiang007

winterwang 发表于 2022-9-5 06:31
其实AR Pistol也没比AR轻便的太多。搞了个8.5寸的。想做家防的。还不如在做个肩膀垫子，戴肩膀上，不和枪连 ...

AR pistol 的主要优势是尺寸，
但是如果没有消的话，千万别拿AR pistol做家防， 开一枪全家听力挂
宁可拿9毫米PCC

俺打算把brace都拆掉， 绝对不会去register

winterwang

嗯！是准备上消的。但是消来了以后发现消音效果没有传说中的那么好。在封闭环境里还是会耳鸣。

xiaojiang007

winterwang 发表于 2022-9-5 21:39
嗯！是准备上消的。但是消来了以后发现消音效果没有传说中的那么好。在封闭环境里还是会耳鸣。 ...

牙龈弹也耳鸣？ 俺只在室外听过556 亚音弹+消觉着声音挺小了

Commissar

牙龈弹,

idee

StarFox000 发表于 2022-9-4 20:44
常见pistol braces

目前存在的braces里面有不算stock的吗？